Dongguan Cowan specializing in the production of electromagnetic vibration KW-XTP-50 Six Degrees of Separation machine, the device affordable, excellent workmanship, high reliability and durability. Six Degrees machine is widely used in electronic appliances, PCB, LED, automotive vehicles, metals, building materials, medical, machinery, instruments and other industries. Electromagnetic vibration KW-XTP-50 Six Degrees machine detailed parameters: 1, Model: KW-XTP-50 Six Degrees 2-one, shaking table with frequency: 0.5 ~ 600HZ 3, shaker control modes: full-featured Standard Control (50XTP [random sine.] series) 4, the vibration direction: Six Degrees machine [random sine.] (the same table at the same time the three-axis vibration) (X / Y / Z axis, up and down / right and left / front) 5, vibration mode: control box + 1 table body Six Degrees machine (the same table at the same time triaxial vibration) (simultaneously / individual / continuous) Vibration] 6, Six Degrees of Separation machine [random sine.]: (X / Y / Z axis, up and down / right and left / front) [same table at the same time triaxial vibration (simultaneous / individual / continuous) Vibration] 7, the vibration waveform: Six Degrees machine [random sine.] (the same table at the same time the three-axis vibration) - Sine Wave - Optional (half-wave or full-wave) 8, vibration frequency: 0.5 ~ 600Hz can be set (± 0.1%) 9, the maximum test load (kg): 100kg 10, amplitude: 0 ~ 5.0mm / Maximum Acceleration: 0 ~ 22g 11, the vibration table size: H6-10mm 12, Taiwan Size: 50 * 55 * 50CM 13, table size: 500 * 500mm and another nine standard (table body / table) size selectable Six Degrees machine [Random Sine] the same table at the same time two-axis vibration ①20: table Size: 200 * 500 * 200mm / under-table size: 200 * 200mm ②35: Taiwan Size: 350 * 500 * 350mm / under-table size: 200 * 200mm ③50: Taiwan Size: 500 * 550 * 500mm / under-table size: 500 * 500mm ④75: Taiwan Size: 750 * 550 * 750mm / under-table size: 500 * 500mm ⑤80: Taiwan Size: 800 * 550 * 800mm / table bottom Size: 800 * 800mm ⑥100: Taiwan Size: 1000 * 550 * 1000mm / under-table size: 800 * 800mm ⑦125: Taiwan Size: 1250 * 550 * 1250mm / under-table Size: 1250 * 1205mm ⑧150: Taiwan Size: 1500 * 550 * 1500mm / under-table Size: 1250 * 1250mm ⑨200: Taiwan Size: 2000 * 550 * 2000mm / under-table Size: 1500 * 1500mm 14, amplitude: 0 ~ 100kg (amplitude: 0 ~ 5.0mm / Maximum Acceleration: 0 ~ 22g) ① Frequency: 0.5 ~ 40HZ can be done 5mm: allowed collision situation a: frequency 1Hz and under no load, the maximum displacement of 5mm (pp), this case is not a collision, b: the frequency of 50Hz and without load , the maximum displacement of 4mm (pp), this situation can not collide c: the maximum frequency of 40Hz and at half load, the maximum displacement can be achieved as 5mm (pp), this small displacement d: the frequency of 20Hz and a maximum load in the case of , the maximum displacement of the vibration measurement platform is 5mm, ② frequency: 0.5 ~ 55HZ frequency amplitude based ③: 1HZ is 5mm, the maximum acceleration can be achieved 0.01g, 35HZ is 5mm, the maximum acceleration can be achieved 12.25g 15, the maximum acceleration can be freely adjusted: 0 ~ 22g (220m / s2) ① Frequency: 45 ~ 600HZ can do 20g ② frequency: 55 ~ 600HZ frequency with maximum acceleration based ③: 80HZ to 20G, the maximum amplitude can be achieved there 1.56mm, 600HZ to 20g, the maximum amplitude can be achieved at a frequency of 10Hz 0.028mm ④ and without load, this situation can not crash, the maximum acceleration is -1g ⑤ measured at a frequency of 50Hz and without load, this situation can not collide, The maximum acceleration measurement value -20g ⑥ frequency 45Hz and in half the maximum load, can not crash, the maximum acceleration measured value -20g ⑦ frequency 50Hz maximum load, this situation can not crash, the maximum acceleration measured value --- -20g acceleration (unit g) = 0.002 * (50Hz) 2 * 4 (amplitude units mmp-p) = 20g (196m / s2) 16, the maximum sine vibration force (force F): 2200kgf (F = Weight * Acceleration ) 17, time control: can be set at any time (in seconds) Y-axis / up and down - any time can be set (seconds) X-axis / about - any time can be set (seconds) Z axis / (( articles turn 90 ℃) that is around the Z-axis) - can be set at any time (in seconds) ① execution time (in seconds): 0 to 65,500 seconds (about 18:00) ② Total executable time: cycles ( 65500 times can be set * 18:00 = 50,000 days) (approximately 135 years) 18, under the most severe conditions of power supply voltage (V): 220 ± 20% / (50 / 60Hz) 19, under the most severe conditions current: 15 (A ) 20, the vibration machine power: 3.3 KW (maximum) 21 Cooling: natural air-cooled 22, temperature and humidity: Temperature -40 ℃ ~ + 80 ℃ / humidity 10% to 95% 23 Noise: 60 db or less: 24, meter: LD-T1 (testable 20mm) (sold separately) ① acceleration (maximum acceleration): 0.1 ~ 199.9m / s2 (peak) (approximately 20g) ② 0.01 ~ 19.99mm displacement amplitude (peak pp) ③ maximum acceleration = 0.002 * F (frequency) 2 * amplitude (peak pp) (mm) (Unit: g) 25, total weight: 165 kg (net weight 155 kg) capacity is for reference only 26, given the acceleration: ± 25% done within the sweep frequency Y-axis acceleration constant change / up and down - ± 25% do sweep frequency variation within the same X-axis acceleration / about - ± 25% do sweep frequency variation within the same Z-axis acceleration / front - ± 25% within do sweep frequency acceleration constant 27, set Amplitude: make sweeping changes in the 25% amplitude frequency constant Y axis / up and down - ± 25% done within the sweep frequency amplitude constant X-axis / about - ± 25 do inside% change in the amplitude frequency sweep constant Z-axis / front - ± 25% done within the sweep frequency constant amplitude 28, the FM frequency (Single Frequency: Frequency / Time / Amplitude / acceleration can be set ① FM Frequency range: 0.5 ~ 600HZ (can be displayed to 0.01Hz) ② Time: execution time (in seconds): 0 seconds to 135 years ③ amplitude (which can be arbitrarily adjusted range mmp-p): 0-5.2mm ④ maximum acceleration available any adjustment: 0 ~ 22g (220m / s2) Y axis / up and down - the frequency / time / amplitude / acceleration can be arbitrarily set the X axis / about - frequency / time / amplitude / acceleration can be arbitrarily set Z-axis / front - - frequency / time / amplitude / Y axis acceleration can be arbitrarily set / up and down (30Hz): X-axis / around (40Hz): Z axis / front (70Hz)] 29 Sweep Frequency: frequency / speed / time / amplitude / Acceleration can be arbitrarily set A: ① Sweep Frequency Range: 0.5 ~ 600HZ tone (can be displayed to 0.01Hz) ② Time: execution time (in seconds): 0 seconds to 135 years ③ amplitude modulation range can be arbitrarily mmp- :( p): 0-5.2mm ④ maximum acceleration can be freely adjusted: 0 ~ 22g (220m / s2) ⑤ real standard swept back and forth and can be recycled, can be set to an infinite set of automatic vibration ⑥ Sweep: frequency and voltage is proportional (low frequency low voltage, high voltage, high frequency) B: real sweep: a: ① such as 10HZ ~ 60HZ ~ 10HZ sweep, from the beginning to the 60HZ 10HZ 60HZ again can not stop, 60HZ to 10HZ 10HZ again can not stop, so repeat is ② correctly sweep in 60HZ and 10HZ pause are all incorrect or even fake ③ with four sections just finished, 10HZ to 11HZ to 10.9HZ then 60HZ, 60HZ to 59HZ to 59.1HZ to 10H was done ④ as do 10HZ -60HZ-10HZ sweep anti-risk starting from 1 to 10HZ to 50HZ to 10HZ tuning standstill since the second coming began to work ⑤ The company is now directly 10HZ-60HZ-10HZ start work b: ① Frequency / Rate / Time / Amplitude / acceleration can be set real standards ② swept back and forth and can be recycled, it can be set to an infinite set of automatic vibration c: 60HZ to do 10 to 30 minutes in Europe and America in recent years business requirements, 60HZ to 10HZ to 30 minutes sweep requirement d: the real solution to sweep from "0" shortcomings C: The first Y-axis sweep right / up / down sweep frequency (20 ~ 80Hz) (black line) X-axis / about / sweep Frequency (10 ~ 60Hz) (red) Z axis / front / sweep frequency (20 ~ 70Hz) (blue line) 1) (A = C) and (B = D) can be arbitrarily set frequency. 2) (a = c) and (b = d) can be arbitrarily set time. 3), and A → B → C → A → B can be set up to 65,500 times. D: The second sweep correct: Y axis / tilt / sweep frequency (20 ~ 80Hz) (black line) X-axis / about / sweep frequency (10 ~ 60Hz) (red) Z axis / front / sweep frequency (20 ~ 70Hz) (blue line) 1) A and B can be arbitrarily set frequency. 2) a time can be arbitrarily set. 3), and A → B → A → B can be set up to 65,500 times. 30 programmable frequency: frequency / speed / time / amplitude / acceleration can be set A: ① programmable frequency range: 0.5 ~ 600HZ tone (can be displayed to 0.01Hz) ② much time each segment frequency vibration: Execution time (in seconds): 0 seconds to 135 years ③ amplitude (which can be arbitrarily adjusted range mmp-p): 0-5.2mm ④ maximum acceleration can be freely adjusted: 0 ~ 22g (220m / s2) ⑤ can be set to 16 groups can be recycled into Unlimited set automatic vibration / computer-based automatic vibration ⑥ unlimited group with the lowest frequency standard based, adjustment (amplitude / acceleration), other frequencies can be programmed as an input output, the higher the frequency (amplitude / acceleration) fewer ( Low) ⑦ unlimited group of computer-based automatic vibration: each section (frequency / time / amplitude / acceleration can be arbitrarily set) B: Programmable (vibration frequency can be set how much time each section) Y axis / tilt / programmable frequency (black line): X-axis / about / programmable frequency (red): Z axis / front / 31 programmable frequency, octave frequency: octave frequency / time / amplitude / acceleration can be set ① programmable frequency / time / Amplitude / acceleration can be set to set unlimited group ② automatic vibration A: ① octave frequency range: 0.5 ~ 600HZ tone (can be displayed to 0.01Hz) ② much time each segment frequency vibration: Execution time (in seconds ): 0 seconds to 135 years ③ amplitude (which can be arbitrarily adjusted range mmp-p): 0-5.2mm ④ maximum acceleration can be freely adjusted: 0 ~ 22g (220m / s2) ⑤ can be set to 16 groups can be recycled into an infinite set of automatic Vibration / computer-based automatic vibration can be infinitely set the standard at the lowest frequency ⑥ main adjustment (amplitude / acceleration), other programmable output frequency as the input, the higher the frequency (amplitude / acceleration), the less (lower) ⑦ computer-based automatic vibration unlimited group: each section (frequency / time / amplitude / acceleration can be arbitrarily set) B: octave (each section can be arbitrarily set how much time the vibration frequency): octave: the next frequency is the previous frequency The number of communication functions: 1, (half / full) sine wave 2, FM vibration: frequency / time / amplitude / acceleration can be set] 3, sweep vibration: frequency / time / amplitude / acceleration can be set] 4, programmable vibration: frequency / time / amplitude / acceleration can be set] 5, frequency vibration: frequency / time / amplitude / acceleration can be set] 6, the number of vibration: frequency / time / amplitude / acceleration can arbitrarily set] 7 AM: 0-5mmp-p] 8, maximum acceleration: 0 ~ 20g (about 200m / s2)] 9, the time control (seconds): Any time can be set] 10,485 Communication interface: can be accessed Computer control] 11, will be acceleration: set acceleration of ± 25%] 12, fixed amplitude: amplitude set within ± 25%] 13, three-axis (XYZ) can be individually adjusted individually amplitude] triaxial (XYZ) can be individually alone tone] triaxial acceleration (XYZ) can be individually adjusted individually frequency] triaxial (XYZ) can be individually adjusted time alone] triaxial (XYZ) can be individually adjusted separately (half / full)]-axis (XYZ) can each Do not tune alone, individual triaxial vibration] (XYZ) can be individually adjusted individually, continuous vibration can choose that axis first triaxial vibration] (XYZ) can be individually adjusted individually, that shaft vibration mode FM: FM / sweep / Available Cheng / octave / logarithmic (frequency / time / amplitude / acceleration can be set)] 14, three-axis (XYZ) can be individually vibration alone] 15, triaxial can always choose consecutive individual vibration] 16, two axis vibration together: three modes: You can always choose to order individual combination] 17, two-axis continuous vibration: the first six modes] (Y axis down) and then (X-Axis) to (X-Axis) before (Y axis upper and lower) to (Y-axis lower) before (Z-axis front) first (front Z-axis) before (Y-axis lower) first (X-Axis) before (Z-axis before and after) the first (front Z-axis) and then ( X-Axis) 18, three-axis continuous vibration: six models] first and then X-axis Y-axis → → → then Z-axis can be repeated indefinitely then Z axis Y axis → → → then X-axis X-axis can be repeated indefinitely → again Z-axis Y-axis → → then can be repeated indefinitely re Y-axis X-axis → → → then Z-axis Z-axis can be repeated indefinitely → re Y axis X axis → → then can be repeated indefinitely and then X-axis Z-axis → → then Y → can be repeated indefinitely shaft 19, random vibration: can (vibration direction mode) / (frequency mode) / (Waveform Mode)] 20, random Power Spectral Density (PSD)] 21, total rms acceleration grms] 22, multi-stage random vibration] 23 road mode vibration levels condensate] 24, together with a full range of motion] Six Degrees of electromagnetic vibration KW-XTP-50 Six Degrees of Separation-one service: 1 year warranty and lifetime service; 2. at Buyer site installation, commissioning, training; 3. After the equipment acceptance, within Guangdong Province eight hours to reach the scene services; Guangdong province two working days to reach the site for users to solve problems. The warranty period: the case of normal operation, resulting in damage to a part, for a free replacement parts only. If serious quality problems within three months, the company can change unconditionally the same type of new aircraft. 5. Warranty: the case of normal operation, certain parts, damaged parts need to be replaced, only the fees. 6. You can provide comprehensive technical training, equipment maintenance, spare parts supply and others to provide timely and comprehensive after-sales service.