Six Degrees machine electromagnetic vibration test stand manufacturer in Dongguan Cowan is a research and development, production, sales and service in one of the specialized test equipment companies, set reliability testing, quality analysis and detection equipment and provide test equipment and technical services integration of the manufacturer, Cowan professional production, technology leadership, service in place. Welcome to order. Six Degrees machine electromagnetic vibration test stand is widely used in national defense, aviation, aerospace, communications, electronics, automotive, appliance, and other industries. The type of equipment used to detect early failure, simulate the actual condition assessment and structural strength test, wide range of products for wide test results are obvious and reliable. Sine, FM, sweep, programmable, frequency, logarithmic, maximum acceleration, amplitude, time control, full-featured computer control, simple set acceleration / constant amplitude. Continuous trouble-free operation of the device by three months of testing, stable performance, reliable quality. Six Degrees machine electromagnetic vibration test stand Technical parameters: 1, Model: KW-XTW-50 Six Degrees 2-one, shaking table with frequency: 0.5 ~ 3000HZ 3, shaker control modes: full-featured standard control ( 50XTP [random sine.] series) 4, the vibration direction: Six Degrees machine [random sine.] (the same table at the same time the three-axis vibration) (X / Y / Z axis, up and down / right and left / front) 5, the vibration mode: +1 station control box body Six Degrees machine [random sine.] (the same table at the same time triaxial vibration) (simultaneously / individual / continuous) Vibration] 6, Six Degrees of Separation one machine: (X / Y / Z axis, Pan / Tilt / front) [same table at the same time triaxial vibration (simultaneous / individual / continuous) Vibration] 7, the vibration waveform: Six Degrees machine [random sine.] (the same table at the same time triaxial vibration) - sine - Alternatively (half-wave or full-wave) 8, vibration frequency: 0.5 ~ 3000Hz can be set (± 0.1%) 9, the maximum test load (kg): 100kg 10, amplitude: 0 ~ 5.0mm / Maximum Acceleration: 0 ~ 22g 11, the vibration table size: H6-10mm 12, Taiwan Size: 50 * 55 * 50CM 13, table size: 500 * 500mm and another nine standard (table body / table) size selectable Six Degrees machine [Random Sine] the same table at the same time two-axis vibration ①20: table Size: 200 * 500 * 200mm / under-table size: 200 * 200mm ②35: Taiwan Size: 350 * 500 * 350mm / under-table size: 200 * 200mm ③50: table body Size: 500 * 550 * 500mm / under-table size: 500 * 500mm ④75: Taiwan Size: 750 * 550 * 750mm / under-table size: 500 * 500mm ⑤80: Taiwan Size: 800 * 550 * 800mm / under-table size: 800 * 800mm ⑥100: Taiwan Size: 1000 * 550 * 1000mm / under-table size: 800 * 800mm ⑦125: Taiwan Size: 1250 * 550 * 1250mm / under-table Size: 1250 * 1205mm ⑧150: Taiwan Size: 1500 * 550 * 1500mm / under-table Size: 1250 * 1250mm ⑨200: Taiwan Size: 2000 * 550 * 2000mm / under-table Size: 1500 * 1500mm 14, amplitude: 0 ~ 100kg (amplitude: 0 ~ 5.0mm / maximum acceleration: 0 ~ 22g ) ① Frequency: 0.5 ~ 40HZ can be done 5mm: allowed collision situation a: frequency 1Hz and under no load, the maximum displacement of 5mm (pp), this case is not a collision, b: the frequency of 50Hz and without load, maximum displacement 4mm (pp), this situation can not collide c: the frequency of 40Hz and a half at maximum load, the maximum displacement can be achieved as 5mm (pp), this small displacement d: the frequency of 20Hz and at maximum load, The maximum value of the vibration displacement measurement platform 5mm, ② Frequency: 0.5 ~ 55HZ ③ amplitude-based frequency: 1HZ is 5mm, the maximum acceleration can be achieved 0.01g, 35HZ is 5mm, the maximum acceleration can be achieved 12.25g 15, The maximum acceleration can be arbitrarily adjusted: 0 ~ 22g (220m / s2) ① Frequency: 45 ~ 3000HZ can do 20g ② Frequency: 55 ~ 3000HZ with maximum acceleration based ③ frequency: 80HZ to 20G, the maximum amplitude can be achieved there is 1.56mm , 3000HZ to 20g, the maximum amplitude can be achieved at a frequency of 10Hz 0.028mm ④ and without load, this situation can not crash, the maximum acceleration is -1g ⑤ measured at a frequency of 50Hz and without load, this situation can not crash, maximum acceleration Measurement is -20g ⑥ frequency 45Hz and at half the maximum load, can not crash, the maximum acceleration measured value -20g ⑦ frequency 50Hz maximum load, this situation can not crash, the maximum acceleration measured value ---- 20g acceleration (unit g) = 0.002 * (50Hz) 2 * 4 (amplitude units mmp-p) = 20g (196m / s2) 16, the maximum sine vibration force (force F): 2200kgf (F = acceleration by weight *) 17 Time control: Any time can be set (seconds) Y-axis / up and down - any time can be set (seconds) X-axis / about - any time can be set (seconds) Z axis / ((Item transfer 90 ℃) that is around the Z-axis) - can be set at any time (in seconds) ① execution time (in seconds): 0 to 65,500 seconds (about 18:00) ② Total executable time: cycles (can be set 65500 views * 18:00 = 50,000 days) (approximately 135 years) 18, under the most severe conditions of power supply voltage (V): 220 ± 20% / (50 / 60Hz) 19, under the most severe conditions current: 15 (A) 20 vibration machine power: 3.3 KW (maximum) 21 Cooling: natural air-cooled 22, temperature and humidity: Temperature -40 ℃ ~ + 80 ℃ / humidity 10% to 95% 23, noise: less than 60 db: 24 meter : LD-T1 (testable 20mm) (sold separately) ① acceleration (maximum acceleration): 0.1 ~ 199.9m / s2 (peak) (approximately 20g) ② 0.01 ~ 19.99mm displacement amplitude (peak pp) ③ maximum acceleration = 0.002 * F (frequency) 2 * amplitude (peak pp) (mm) (Unit: g) 25, total weight: 165 kg (net weight 155 kg) capacity is for reference only 26, given the acceleration: ± 25% done within the sweep frequency acceleration constant Y axis / up and down - ± 25% within the sweep frequency variation do the same X-axis acceleration / about - ± 25% done within the sweep frequency acceleration constant Z-axis / front - ± 25% within do sweep Frequency change in acceleration constant 27, fixed amplitude: 25% by doing constant amplitude sweep frequency Y axis / up and down - ± 25% change in the amplitude frequency sweep to do the same X-axis / about - ± 25% within do sweep frequency amplitude constant Z-axis / front - ± 25% done within the sweep frequency constant amplitude 28, the FM frequency (Single Frequency: Frequency / Time / Amplitude / acceleration can be set ① FM frequency range : 0.5 ~ 3000HZ (can be displayed to 0.01Hz) ② Time: execution time (in seconds): 0 seconds to 135 years ③ amplitude (which can be arbitrarily adjusted range mmp-p): 0-5.2mm ④ maximum acceleration can be freely adjusted : 0 ~ 22g (220m / s2) Y axis / up and down - the frequency / time / amplitude / acceleration can be arbitrarily set the X axis / about - frequency / time / amplitude / acceleration can be arbitrarily set Z-axis / front - Frequency / time / amplitude / Y axis acceleration can be arbitrarily set / up and down (30Hz): X-axis / around (40Hz): Z axis / front (70Hz)] 29 Sweep Frequency: frequency / speed / time / amplitude / acceleration can be arbitrary Setting A: ① Sweep Frequency Range: 0.5 ~ 3000HZ tone (can be displayed to 0.01Hz) ② Time: execution time (in seconds): 0 seconds to 135 years :( ③ amplitude modulation range can be arbitrarily mmp-p) : 0-5.2mm ④ maximum acceleration can be freely adjusted: 0 ~ 22g (220m / s2) ⑤ real standard swept back and forth and can be recycled, can be set to an infinite set of automatic vibration ⑥ Sweep: frequency and voltage is proportional (low voltage and low frequency , high voltage, high frequency) B: real sweep: a: ① such as 10HZ ~ 60HZ ~ 10HZ sweep, from the beginning to the 60HZ 10HZ 60HZ again can not stop, 60HZ to 10HZ 10HZ again can not stop, so repeat sweep is correct Frequency ② in 60HZ and 10HZ pause are all incorrect or even fake ③ with four sections just finished, 10HZ to 11HZ to 10.9HZ then 60HZ, 60HZ to 59HZ to 59.1HZ to 10H was done ④ as do 10HZ-60HZ Sweep anti -10HZ the risk is from the beginning to 10HZ to 50HZ to 10HZ tuning standstill since the second coming began to work ⑤ The company is now directly 10HZ-60HZ-10HZ start work b: ① frequency / speed / time / Amplitude / acceleration can be set real standards ② swept back and forth and can be recycled, can be set to an infinite set of automatic vibration c: to do business in Europe and America in recent years of claims 10 to 30 minutes to 60HZ, 60HZ to 10HZ to 30 minutes The sweep requires d: really solve sweep from "0" shortcomings C: The first Y-axis sweep right / up / down sweep frequency (20 ~ 80Hz) X-axis / about / sweep frequency (10 ~ 60Hz ) Z axis / front / sweep frequency (20 ~ 70Hz) 1) (A = C) and (B = D) can be arbitrarily set frequency. 2) (a = c) and (b = d) can be arbitrarily set time. 3), and A → B → C → A → B can be set up to 65,500 times. D: The second sweep correct: Y axis / tilt / sweep frequency (20 ~ 80Hz) X-axis / about / sweep frequency (10 ~ 60Hz) Z axis / front / sweep frequency (20 ~ 70Hz) 1) A and B can be arbitrarily set frequency. 2) a time can be arbitrarily set. 3), and A → B → A → B can be set up to 65,500 times. 30 programmable frequency: frequency / speed / time / amplitude / acceleration can be set A: ① programmable frequency range: 0.5 ~ 3000HZ tone (can be displayed to 0.01Hz) ② much time each segment frequency vibration: Execution time (in seconds): 0 seconds to 135 years ③ amplitude (which can be arbitrarily adjusted range mmp-p): 0-5.2mm ④ maximum acceleration can be freely adjusted: 0 ~ 22g (220m / s2) ⑤ can be set to 16 groups can be recycled into Unlimited set automatic vibration / computer-based automatic vibration ⑥ unlimited group with the lowest frequency standard based, adjustment (amplitude / acceleration), other frequencies can be programmed as an input output, the higher the frequency (amplitude / acceleration) fewer ( Low) ⑦ unlimited group of computer-based automatic vibration: each section (frequency / time / amplitude / acceleration can be arbitrarily set) B: Programmable (vibration frequency can be set how much time each section) Y axis / tilt / programmable frequency : X axis / about / programmable frequency: Z axis / front / 31 programmable frequency, octave frequency: octave frequency / time / amplitude / acceleration can be set ① programmable frequency / time / amplitude / acceleration can be arbitrarily set You can set an infinite set of fixed ② automatic vibration A: ① octave frequency range: 0.5 ~ 3000HZ tone (can be displayed to 0.01Hz) ② much time each segment frequency vibration: Execution time (in seconds): 0 seconds to 135 years ③ amplitude (which can be arbitrarily adjusted range mmp-p): 0-5.2mm ④ maximum acceleration can be freely adjusted: 0 ~ 22g (220m / s2) ⑤ can be set to 16 groups can be recycled into an infinite set of automatic vibration / computer-based unlimited group ⑥ standard automatic vibration to the lowest frequency mainly adjustment (amplitude / acceleration), other programmable output frequency as the input, the higher the frequency (amplitude / acceleration), the less (lower) ⑦ unlimited set of computer-based automatic vibration : each section (frequency / time / amplitude / acceleration can be arbitrarily set) B: octave (vibration frequency can be set how much time each section): octave: the next frequency is the frequency of the letter before a number of functions: 1, (half / full) sine wave 2, FM vibration: frequency / time / amplitude / acceleration can be set] 3, sweep vibration: frequency / time / amplitude / acceleration can be set] 4, programmable vibration: Frequency / Time / Amplitude / acceleration can be set] 5, frequency vibration: frequency / time / amplitude / acceleration can be set] 6, the number of vibration: frequency / time / amplitude / acceleration can be set] 7 AM : 0-5mmp-p] 8, maximum acceleration: 0 ~ 20g (about 200m / s2)] 9, the time control (seconds): Any time can be set] 10,485 Communication Interface: 11] can be accessed by computer-controlled, fixed acceleration : given the acceleration of ± 25%] 12, fixed amplitude: amplitude set within ± 25%] 13, three-axis (XYZ) can be individually adjusted individually amplitude] triaxial (XYZ) can be individually adjusted individually] triaxial acceleration (XYZ ) can be individually adjusted individually frequency] triaxial (XYZ) can be individually adjusted time alone] triaxial (XYZ) can be individually adjusted separately (half / full)]-axis (XYZ) can be individually adjusted individually, individual vibration] three-axis (XYZ) can be individually adjusted individually, continuous vibration can choose that axis first triaxial vibration] (XYZ) can be individually adjusted individually, that shaft vibration mode FM: FM / sweep / can drive / multiplier / logarithmic (frequency / time / amplitude / acceleration can be set)] 14, a three-axis (XYZ) can be individually vibration alone] 15, triaxial can always choose consecutive individual vibration] 16, two-axis vibration together: three modes : You can always choose to order individual combination] 17, two-axis continuous vibration: the first six modes] (Y axis down) and then (X-Axis) to (X-Axis) before (Y-axis lower) first (lower Y-axis ) before (Z-axis front) first (Z axis around) before (Y-axis lower) first (X-Axis) before (Z-axis before and after) the first (Z-axis front to back) and then (X-Axis) 18, three axis continuous vibration: six models] first and then X-axis Y-axis → → → then Z-axis can be repeated indefinitely then Z axis Y axis → → → then X-axis X-axis can be repeated indefinitely → then again Y axis Z axis → → X-axis can be repeated indefinitely → then Y axis Z axis → → then can be repeated indefinitely re Y axis Z axis → → → then X-axis Z-axis can be repeated indefinitely → then again Y-axis X-axis → → can be repeated indefinitely. 19, Random Vibration: can (vibration direction mode) / (frequency mode) / (Waveform Mode)] 20, random Power Spectral Density (PSD)] 21, total rms acceleration grms] 22, multi-stage random vibration] 23, road mode condensate vibration levels] 24, together with a full range of motion] Six Degrees of Separation Six Degrees machine electromagnetic vibration test stand manufacturer service: free delivery and installation operation (until the demand side operate independently and staff satisfaction) of equipment, machine free year warranty and lifetime maintenance. Technician during the warranty period free quarterly maintenance to improve the life of equipment and services for users to follow. Thanks for your patience browsing reading, if necessary, please call: 18825596769 for more details.