Four degrees one electromagnetic vibration test stand manufacturers Cowan engaged in the development, production and sales of environmental testing equipment for thirteen years, with mature technology, superb technology and strict quality control, product sales hit record highs, won numerous old and new customers praise and recognition. Four degrees one electromagnetic vibration test stand use: The device is widely used in PCB, PCB circuit board, LED, defense, aviation, aerospace, communications, electronics, automotive, appliance, and other industries. The type of equipment used to detect early failure, simulate the actual condition assessment and structural strength test, wide range of products for wide test results are obvious and reliable. Sine, FM, sweep, programmable, frequency, logarithmic, maximum acceleration, amplitude, time control, full-featured computer control, simple set acceleration / constant amplitude. Continuous trouble-free operation of the device by three months of testing, stable performance, reliable quality. Four degrees one electromagnetic vibration test stand Technical parameters: 1, Model: KW-ATP-50 four-dimensional space-one 2, vibration table with frequency: 0.5 ~ 5000HZ 3, shaker control modes: full-featured standard control (50ATW [ Random Sine] series) 4, the vibration direction: four-dimensional space-one [random sine] (the same table at the same time two-axis vibration) (Y. [X or Z axis], up and down [left or front to back) 5, the vibration mode. : control box + 1 table body] four degrees one machine [random sine] [same table two-axis simultaneous vibration (simultaneous / individual / continuous) Vibration] 6, the vibration waveform: four-dimensional space-one [random sine] ( the same table at the same time two-axis vibration) - sine - optional (half-wave or full-wave) 7, vibration frequency: 0.5 ~ 5000 Hz can be set (± 0.1%) 8, the maximum test load (kg): 100kg 9 amplitude: 0 ~ 5.0mm / maximum acceleration: 0 ~ 22g) 10, the vibration table size H6-10mm 11, Taiwan Size: 500 * 350 * 500mmM 12, table size: 500 * 6 * 500mm and another nine standard ( Taiwan body / table) size selectable: ①20: Taiwan Size: 200 * 300 * 200mm / under-table size: 200 * 200mm ②35: Taiwan Size: 350 * 300 * 350mm / under-table size: 200 * 200mm ③50: Taiwan Size: 500 * 350 * 500mm / under-table size: 500 * 500mm ④75: Taiwan Size: 750 * 350 * 750mm / under-table size: 500 * 500mm ⑤80: Taiwan Size: 800 * 350 * 800mm / under-table size : 800 * 800mm ⑥100: Taiwan Size: 1000 * 350 * 1000mm / under-table size: 800 * 800mm ⑦125: Taiwan Size: 1250 * 350 * 1250mm / under-table Size: 1250 * 1250mm ⑧150: Taiwan Size: 1500 * 350 * 1500mm / under-table Size: 1250 * 1250mm ⑨200: Taiwan Size: 2000 * 350 * 2000mm / under-table Size: 1500 * 1500mm 13, amplitude: 0 ~ 100kg (amplitude: 0 ~ 5.0mm / Maximum Acceleration: 0 ~ 22g) ① Frequency: 0.5 ~ 40HZ can be done 5mm: allowed collision situation a: frequency 1Hz and under no load, the maximum displacement of 5mm (pp), this case is not a collision, b: the frequency of 50Hz and under no load, The maximum displacement of 4mm (pp), this situation can not collide c: the frequency of 40Hz and a half at maximum load, the maximum displacement can be achieved as 5mm (pp), this small displacement d: the frequency of 20Hz and in the case of maximum load , the maximum displacement of the vibration measurement platform is 5mm, ② frequency: 0.5 ~ 55HZ frequency amplitude based ③: 1HZ is 5mm, the maximum acceleration can be achieved 0.01g, 35HZ is 5mm, the maximum acceleration can be achieved 12.25g 14 The maximum acceleration can be arbitrarily adjusted: 0 ~ 22g (220m / s2) ① Frequency: 45 ~ 5000HZ can do 20g ② Frequency: 55 ~ 5000HZ with maximum acceleration based ③ frequency: 80HZ to 20G, the maximum amplitude can be achieved 1.56 mm, 5000HZ to 20g, the maximum amplitude can be achieved at a frequency of 10Hz 0.0011mm ④ and without load, this situation can not crash, the maximum acceleration is -1g ⑤ measured at a frequency of 50Hz and without load, this situation can not collide, the maximum acceleration measurement value -20g ⑥ frequency 45Hz and at half the maximum load, can not crash, the maximum acceleration measured value -20g ⑦ frequency 50Hz maximum load, this situation can not crash, maximum acceleration measurement value ---- 20g acceleration (unit g) = 0.002 * (50Hz) 2 * 4 (amplitude units mmp-p) = 20g (196m / s2) 15, the maximum sine vibration force (force F): 2200kgf (F = Weight * acceleration) 16, time control: can be set at any time (in seconds) Y-axis / up and down - any time can be set (seconds) X-axis / about - any time can be set (seconds) Z axis / ((Item turn 90 ℃) that is around the Z-axis) - can be set at any time (in seconds) ① execution time (in seconds): 0 to 65,500 seconds (about 18:00) ② Total executable time: cycles (available provided 65500 times * 18:00 = 50,000 days) (about 135 years) 17, the most severe conditions the power supply voltage (V): 220 ± 20% / (50 / 60Hz) ① under 18, the most severe conditions of electronic leakage current device: 15 (A) 20, Cooling: natural air cooling 21, temperature and humidity: Temperature -40 ℃ ~ + 80 ℃ / humidity 10% to 95% 22 Noise: 60 db or less: 23 meter LD-T1 (testable 20mm) (sold separately) ① acceleration (maximum acceleration): 0.1 ~ 199.9m / s2 (peak) (approximately 20g) ② 0.01 ~ 19.99mm displacement amplitude (peak pp) ③ maximum acceleration = 0.002 * F (frequency) 2 * Amplitude (peak pp) (mm) (Unit: g) 24, total weight: 145 kg (net weight 140 kg) capacity is for reference only 25, given the acceleration: ± 25% within the sweep frequency variation do the same Y-axis accelerometer / tilt - - ± 25% within the sweep frequency variation do the same X-axis acceleration / about - ± 25% done within the sweep frequency acceleration constant {(articles turn 90 ℃) that is around the Z axis - ± within 25% do Swept frequency amplitude constant} 26, set amplitude: ± make sweeping changes in the 25% amplitude frequency constant Y axis / up and down - ± 25% done within the sweep frequency amplitude constant X-axis / about - ± 25% do sweep frequency variation within the same amplitude {(articles for 90 ℃) that is around the Z axis - ± 25% done within the sweep frequency amplitude constant} 27, FM frequency (Single Frequency: Frequency / Time / Amplitude / acceleration can be set ① FM frequency range: 0.5 ~ 5000HZ (can be displayed to 0.01Hz) ② Time: execution time (in seconds): 0 seconds to 135 years ③ amplitude (which can be arbitrarily adjusted range mmp-p ): 0-5.2mm ④ maximum acceleration can be freely adjusted: 0 ~ 22g (220m / s2) Y axis / up and down - the frequency / time / amplitude / acceleration can be arbitrarily set the X axis / about - frequency / time / amplitude / acceleration can be arbitrarily set {((Item turn 90 ℃) that is around the Z-axis) before (at Y-axis)} 28, sweep frequency: frequency / speed / time / amplitude / acceleration can be set A: ① Sweep Frequency Range: 0.5 ~ 5000HZ tone (can be displayed to 0.01Hz) ② Time: execution time (in seconds): 0 seconds to 135 years ③ amplitude (which can be arbitrarily adjusted range mmp-p): 0-5.2mm ④ The maximum acceleration can be arbitrarily adjusted: 0 ~ 22g (220m / s2) ⑤ real standard swept back and forth and can be recycled, it can be set to an infinite set of automatic vibration ⑥ Sweep: frequency and voltage is proportional (low voltage and low frequency, high voltage, high frequency) B: The real sweep: a: ① such as 10HZ ~ 60HZ ~ 10HZ sweep, from the beginning to the 60HZ 10HZ 60HZ again can not stop, 60HZ to 10HZ 10HZ again can not stop, so repeat sweep ② is correct in 60HZ and 10HZ ③ pause are all incorrect or even fake it done with four segments, 10HZ to 11HZ to 10.9HZ then 60HZ, 60HZ to 59HZ to 10HZ 59.1HZ to do the sweep was done ④ as proof of 10HZ-60HZ-10HZ 1 starts to run from 10HZ to 50HZ to 10HZ standstill since the second round began after tuning to work ⑤ The company is now directly 10HZ-60HZ-10HZ start work b: ① frequency / rate / time / amplitude / acceleration can be arbitrary ② real swept back and forth to set standards and can be recycled, can be set to an infinite set of automatic vibration c: to do business in Europe and America in recent years of claims 10 to 30 minutes to 60HZ, 60HZ 10HZ to 30 minutes to sweep the requirements of d: the real solution to sweep from "0" shortcomings C: The first correct Sweep: Y axis / tilt / sweep frequency (20 ~ 80Hz) (black line) X-axis / about / sweep frequency (10 ~ 60Hz) (red) {first ((Item switch 90 ℃) that is around the Z-axis) and then (at Y axis)} 2) (a = c) and (b = d) can be arbitrarily set time. 3), and A → B → C → A → B can be set up to 65,500 times. D: The second sweep correct: Y axis / tilt / sweep frequency (20 ~ 80Hz) (black line) X-axis / about / sweep frequency (10 ~ 60Hz) (red) {first ((articles for 90 ℃ ) that is around the Z-axis) and then under (Y-axis)} 2) a time can be arbitrarily set. 3), and A → B → A → B can be set up to 65,500 times. 4) and reach the B / C / D must not stay in the standard only to immediately convert the Division, as 29 programmable frequency: frequency / speed / time / amplitude / acceleration can be set A: ① programmable frequency range: 0.5 ~ 5000HZ tone (can be displayed to 0.01Hz) ② much time each segment frequency vibration: Execution time (in seconds): 0 seconds to 135 years ③ amplitude (which can be arbitrarily adjusted range mmp-p): 0-5.2mm ④ Maximum acceleration can be arbitrarily adjusted: 0 ~ 22g (220m / s2) ⑤ can be set to 16 groups can be recycled into an infinite set of automatic vibration / computer-based automatic vibration can be infinitely set the standard at the lowest frequency ⑥ main adjustment (amplitude / acceleration). Other programmable output frequency as the input, the higher the frequency (amplitude / acceleration), the less (lower) ⑦ unlimited group of computer-based automatic vibration: each section (frequency / time / amplitude / acceleration can be arbitrarily set) B: Programmable: the vibration frequency can be set how much time each segment Y axis / tilt / programmable frequency (black line) X-axis / about / programmable frequency (red) {first ((Item turn 90 ℃) that is around the Z axis ) before (at Y-axis)} 30, octave frequency: octave frequency / time / amplitude / acceleration can be set ① programmable frequency / time / amplitude / acceleration can be set ② automatic vibration can set an unlimited group A: ① octave frequency range: 0.5 ~ 5000HZ tone (can be displayed to 0.01Hz) ② much time each segment frequency vibration: Execution time (in seconds): 0 seconds to 135 years ③ amplitude (which can be arbitrarily adjusted range mmp- p): 0-5.2mm ④ maximum acceleration can be freely adjusted: 0 ~ 22g (220m / s2) ⑤ can be set to 16 groups can be recycled into an infinite set of automatic vibration / computer-based automatic vibration ⑥ unlimited set the standard at the lowest frequency Lord adjustment (amplitude / acceleration), other programmable output frequency as the input, the higher the frequency (amplitude / acceleration), the less (lower) ⑦ unlimited group of computer-based automatic vibration: each section (frequency / time / amplitude / acceleration can be arbitrarily set) B: octave (each section can be arbitrarily set how much time the vibration frequency): octave: the next frequency is the frequency of the channel number of the previous four degrees one electromagnetic vibration test stand functions: 1, ( half / full) sine wave 2, FM vibration: frequency / time / amplitude / acceleration can be arbitrarily set 3, sweep vibration: frequency / time / amplitude / acceleration can be set 4 can be programmed vibration: frequency / time / amplitude / acceleration can be arbitrarily set 5, frequency vibration: frequency / time / amplitude / acceleration can be set. 6, the number of vibration: frequency / time / amplitude / acceleration can be set 7 AM: 0-5mmp-p 8 The maximum acceleration: 0 ~ 20g (about 200m / s2) 9, time control (seconds): 10,485 at any time can be set Communication interface: can be accessed by computer control 11, will be acceleration: set acceleration within ± 25% of 12, set amplitude : fixed amplitude ± 25% 13, two-axis (Y. [X or Z axis]) can be individually adjusted individually amplitude biaxial (Y. [X or Z axis]) can be adjusted individually separate two-axis acceleration (Y. [X or Z axis]) can be individually adjusted individually frequency two-axis (Y. [X or Z axis]) can be individually adjusted time alone two axes (Y. [X or Z axis]) can be individually adjusted separately (half / All) two axes (Y. [X or Z axis]) can be individually adjusted individually, individual two-axis vibration (Y. [X or Z axis]) can be individually adjusted individually, continuous vibration can choose that axis vibration first two axis (Y. [X or Z axis]) can be individually adjusted individually, that shaft vibration mode FM: FM / sweep / can drive / multiplier / logarithmic (frequency / time / amplitude / acceleration can be set) 14 , two-axis (Y. [X or Z axis]): You can individually separate vibration 15, the second shaft may always choose the respective vibration consecutive 16, two-axis vibration together: two modes: You can always choose to order individual combination 17, two-axis continuous vibration: two modes first (Y-axis lower) before (X-Axis) → can be repeated indefinitely {first (Y axis down) before ((Item turn 90 ℃) that is around the Z axis) → unlimited Repeat} first (X-Axis) before (Y axis down) → can be repeated indefinitely {first ((Item turn 90 ℃) that is around the Z-axis) before (Y axis down) → can be repeated indefinitely} 18, the second shaft (Y. [X or Z axis]) along two axes simultaneously vibration: Y axis under / X axis about 19, random vibration: can (vibration direction mode) / (frequency mode) / (Waveform Mode) 20, a random power spectrum Density (PSD) 21, total rms acceleration grms 22, multi-stage random vibration 23, 24 road vibration mode condensate levels, together with a full range of four-dimensional space of action 25, a full-featured Standard: All of the above contains 26 full-featured Computer control: microcomputer control containing only four degrees one type of electromagnetic vibration test stand factory service: 1. two-year warranty and lifetime service; 2. Free installation at the buyer site, commissioning and training; 3. After the acceptance of the equipment, Guangdong Province arrive at the scene within eight hours; Guangdong province two working days, arrived at the scene to solve the problem for users. The warranty period: the case of normal operation, resulting in damage to a part, for a free replacement parts only. If serious quality problems within three months, the company can change unconditionally the same type of new aircraft. 5. Warranty: the case of normal operation, certain parts, damaged parts need to be replaced, only the fees. 6. You can provide comprehensive technical training, equipment maintenance, spare parts supply and others to provide timely and comprehensive after-sales service. Electromagnetic vibration test stand four degrees one another manufacturer: Electromagnetic vertical and horizontal vibration table, six times one shaking table, non-standard build electromagnetic vibration table to find Dongguan Cowan, we provide the most professional and most suitable for your most affordable Quote scheme. Welcome to inquire Order: 0769-83338830.18825596769.